Various Size cost price Perfect quality Hose Whip Restraint whip check safety cable
Short Description:
Hose Safety Whip Checks are recommended in all pressurized hose applications over 1/2 inch, in order to keep operators and job sites safe. To prevent serious injury due to hose or coupling failure, install a Whip Check at each hose connection and from equipment / air source to the hose. Spring-loaded loops easily adjust to slip over the couplings and maintain a firm grip on the hose. Also known as whip arrestors or hose choker cables, these cables are a necessity for all pneumatic supply hose applications.
Whip checks should be installed in the fully extended position (no slack) for proper safety assurance.
Hose Safety Whip Checks, along with pneumatic check valves and safety clips, are integral products for a safe pneumatic hose system. Regular inspection and replacement of worn components is also imperative in maintaining a safe system and workplace. Always replace whip checks if a failure incident occurs, as this can cause damage to the cable and connections.
Hose Whip Restraint Whipcheck Safety Cable whipcheck safety slings are a positive safe – guard for hose connections. These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device. Reaches across the hose fittings to provide stand-by safety for hose. Spring loaded loops in cable ends open easily to pass over the couplings for firm grip on hose, as shown. They have been thoroughly tested with years of service.
Are designed to help prevent injuries or accidents resulting from hose or coupling failure. A whipcheck extends across the hose fittings to give standby safety for a hose. Simply pull back the spring and slip the loops on the over each hose before connection to provide security against hose whip.
Hose Safety Whip Checks are the trusted industry standard in air hose safety. With 4 adjustable sizes and two different end styles, ware sure to have a cable that fits into your air hose configuration. Spring loop ends adjust to fit snug around a variety of hose diameters.
Hose Safety Whip Check Cables meet OSHA and MSHA requirements to decrease the potential hazards of hose whip, risk to operators and bystanders, and decrease potential damage to equipment.
Whip checks should be installed in the fully extended position (no slack) for proper safety assurance.
Whip Check Cables are rated for 200 PSI air service. For higher pressure installations please see our nylon hose restraints, hose cable chokers, and hose whip stop systems.
Our hose has been designed and created with our customers in mind, enabling the prevention of accidents where a hose line may separate unintentionally and cause hose whip.
Features & Benefits
Effective safeguard to prevent hose whip
Suitable for use on hose-to-hose connections and hose to compressor installations
Manufactured from flexible, galvanised, multistrand wire
Size Specifications
| product name | size | Material | Wire rope diameter(mm) | Overall length(mm) | Spring lengthMM) | Spring outer diameter(mm) | Spring thickness(mm) | Suitable pipe diameter size | Destructive power(KG) | ||
| whipcheck | 1/4" *38" | Galvanized carbon steel | 6 | 970 | 350 | 18 | 2.0 | 1 1/2”-3” | 2200 | ||
Product construction and testing
1/4" * 38", They are manufactured from 6mm galvanized steel wire rope to a safe dead load of 2 tonne.
LH Safety - Cable Hose Restraints also known as Whip Checks are stocked as well. We recommend whipchecks be used only on AIR HOSES carrying no more than 200 PSI. Any other use is at your own risk.
Usage
Whip check safety cable is designed specially to prevent hose connections from whipping if the hoses or couplings failed to hold. The failure usually occurs with high pressure and will make hoses or equipment shake violently which may cause serious injury for people or the nearby coupling & equipment.
Package
