Whip Stop Hose Restraint，Whip Check，Hose to Hose，Hose Whip
Short Description:
safety cable is a safety device used to prevent a hose or cable from shaking in the event of a hose or coupling failure. It is typically used in industrial applications where high-pressure hoses or cables are used, such as compressed air systems or hydraulic equipment. Whip safety cables consist of a strong steel cable that is connected to a hose or cable at one end and secured to the machine or equipment at the other end. If a hose or fitting fails or disconnects, whipping cables prevent it from “whipping” or swinging out of control, reducing the risk of injury to nearby personnel or damage to surrounding equipment. Whipcheck safety cables are designed to be flexible and able to withstand strain and extreme conditions. It is important to regularly inspect and replace whiplash cables that show signs of wear or damage to ensure their effectiveness and maintain a safe working environment.
Whipcheck Safety Cable whip check for air hose Air Hose Safety Whip Check whipcheck safety cable are a positive safe – guard for hose connections. These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device. Reaches across the hose fittings to provide stand-by safety for hose. Spring loaded loops in cable ends open easily to pass over the couplings for firm grip on hose, as shown.
They have been thoroughly tested with years of service.Are designed to help prevent injuries or accidents resulting from hose or coupling failure. A whipcheck extends across the hose fittings to give standby safety for a hose. Simply pull back the spring and slip the loops on the over each hose before connection to provide security against hose whip.
A shock-resistant safety cable is a safety device used to prevent a hose or cable from shaking in the event of a hose or coupling failure. It is typically used in industrial applications where high-pressure hoses or cables are used, such as compressed air systems or hydraulic equipment. Whip safety cables consist of a strong steel cable that is connected to a hose or cable at one end and secured to the machine or equipment at the other end. If a hose or fitting fails or disconnects, whipping cables prevent it from "whipping" or swinging out of control, reducing the risk of injury to nearby personnel or damage to surrounding equipment. Whipcheck safety cables are designed to be flexible and able to withstand strain and extreme conditions. It is important to regularly inspect and replace whiplash cables that show signs of wear or damage to ensure their effectiveness and maintain a safe working environment.
Whipcheck Safety Cables are available in two cable diameters and a number of different configurations. Whipcheck offer additional safety for compressor hoses in enclosed or critical enviroments.
Whipcheck safety cables offer additional safety for compressor hoses in enclosed or critical environment.
Whipcheck safety cables have been used for many years on air compressor hoses to prevent hose ends from 'whipping' if the coupling blows out of the hose.
Whipcheck safety cables are available in 1/8" (3.2mm) and 1/4" (6.35mm) cable diameters and in two basic configurations - hose to hose and hose to tool. Hose to Hose are used at the joint between two hose assemblies. Hose to Tool are used at the junction between the hose and the tool but are also very important at the compressor end. The compressed gas can be very hot causing the hose to soften which in turn can lead to an increased possibility of failure.
Fitting the Whipcheck safety cables correctly is critical to their performance. The loop ends should be placed as far down the hose as possible. With the Hose to Hose type, the ferrule in the centre of the Whipcheck should lay at the same point as the joint between the two hoses.
The standard materials of construction are galvanised steel wire, plated steel springs and aluminium ferrules. However, Whipcheck are available in a variety of different styles including Stainless Steel and copper ferrules for marine and applications where the risk of the steel cables sparking is not acceptable.
We also supply large whip check for 4", 6" and 8"nb hose.
We can also offer non-standard versions, made to customer specification, if large quantities are required.
Hose Safety Whip Checks are the trusted industry standard in air hose safety. With 4 adjustable sizes and two different end styles, ware sure to have a cable that fits into your air hose configuration. Spring loop ends adjust to fit snug around a variety of hose diameters.
Size Specifications：
| product name | size | Material | Wire rope diameter(mm) | Overall length(mm) | Spring lengthMM) | Spring outer diameter(mm) | Spring thickness(mm) | Suitable pipe diameter size | Destructive power(KG) | ||
| whipcheck | 1/8" * 20 1/4" | Galvanized carbon steel | 3 | 510 | 180 | 12 | 1.2 | 1/2”-1 1/4” | 700 | ||
| whipcheck | 3/16" *28" | Galvanized carbon steel | 5 | 710 | 240 | 18 | 2.0 | 1/2”-2” | 1400 | ||
| whipcheck | 1/4" *38" | Galvanized carbon steel | 6 | 970 | 350 | 18 | 2.0 | 1 1/2”-3” | 2200 | ||
| whipcheck | 3/8"*44" | Galvanized carbon steel | 10 | 1110 | 310 | 25 | 2.0 | 4” | 3300 | ||
Product construction and testing
LH Safety - Cable Hose Restraints also known as Whip Checks are stocked as well. We recommend whipchecks be used only on AIR HOSES carrying no more than 200 PSI. Any other use is at your own risk.
Usage
Whip check safety cable is designed specially to prevent hose connections from whipping if the hoses or couplings failed to hold. The failure usually occurs with high pressure and will make hoses or equipment shake violently which may cause serious injury for people or the nearby coupling & equipment.
Package
