Whip check slings are a positive safe–guard for hose connections. These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device. “Whipcheck” reaches across the hose fittings to provide stand-by safety for hose. Spring loaded loops in cable ends open easily to pass over the couplings for firm grip on hose, as shown. They have been thoroughly tested with years of service. There are various sizes of Whipchecks manufactured by LH. All materials used for in the manufacturing process conform to SABS & ISO standards, Materials being the cable, ferrules ect.
-
Whipcheck Safety Steel Whip Check Cable Galvanized Hose Whip Restraint
When an unintentional separation occurs, it is because of compressed air or fluid building up in the hose. When this happens, the hose will furiously whip because of the built up pressure. Through the use of whipcheck equipment, hose whipping will not occur – the strong galvanised stainless steel cable helps to prevent a whip through the easily fitted loaded spring loops, which grip a hose securely and firmly.
-
carbon steel & ss304 Whip Check Cable sling
safety cable is a safety device used to prevent a hose or cable from shaking in the event of a hose or coupling failure. It is typically used in industrial applications where high-pressure hoses or cables are used, such as compressed air systems or hydraulic equipment. Whip safety cables consist of a strong steel cable that is connected to a hose or cable at one end and secured to the machine or equipment at the other end. If a hose or fitting fails or disconnects, whipping cables prevent it from “whipping” or swinging out of control, reducing the risk of injury to nearby personnel or damage to surrounding equipment. Whipcheck safety cables are designed to be flexible and able to withstand strain and extreme conditions. It is important to regularly inspect and replace whiplash cables that show signs of wear or damage to ensure their effectiveness and maintain a safe working environment. -
High-end good price Durable strong high tension steel cable Hose whip check specification
When an unintentional separation occurs, it is because of compressed air or fluid building up in the hose. When this happens, the hose will furiously whip because of the built up pressure. Through the use of whipcheck equipment, hose whipping will not occur – the strong galvanised stainless steel cable helps to prevent a whip through the easily fitted loaded spring loops, which grip a hose securely and firmly.
-
Hose Whip Restraint System cable assemblies for hoses attached with flange connections
Our hose whipcheck has been designed and created with our customers in mind, enabling the prevention of accidents where a hose line may separate unintentionally and cause hose whip.Effective safeguard to prevent hose whip
Suitable for use on hose-to-hose connections and hose to compressor installations
Manufactured from flexible, galvanised, multistrand wire -
Various Size cost price Perfect quality Hose Whip Restraint whip check safety cable
Hose Safety Whip Checks are recommended in all pressurized hose applications over 1/2 inch, in order to keep operators and job sites safe. To prevent serious injury due to hose or coupling failure, install a Whip Check at each hose connection and from equipment / air source to the hose. Spring-loaded loops easily adjust to slip over the couplings and maintain a firm grip on the hose. Also known as whip arrestors or hose choker cables, these cables are a necessity for all pneumatic supply hose applications.
Whip checks should be installed in the fully extended position (no slack) for proper safety assurance.
Hose Safety Whip Checks, along with pneumatic check valves and safety clips, are integral products for a safe pneumatic hose system. Regular inspection and replacement of worn components is also imperative in maintaining a safe system and workplace. Always replace whip checks if a failure incident occurs, as this can cause damage to the cable and connections. -
Explosion-proof chain whipcheck Hose Cable Choker
Whipcheck – safety slings are a positive safe – guard for hose connections. These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device.
Effective safeguard to prevent hose whip
Suitable for use on hose-to-hose connections and hose to compressor installations
Manufactured from flexible, galvanised, multistrand wire -
Hose to Hose Whipchecks safety cable
Hose Safety Whip Checks are the trusted industry standard in air hose safety. With 4 adjustable sizes and two different end styles, ware sure to have a cable that fits into your air hose configuration. Spring loop ends adjust to fit snug around a variety of hose diameters.
Hose Safety Whip Check Cables meet OSHA and MSHA requirements to decrease the potential hazards of hose whip, risk to operators and bystanders, and decrease potential damage to equipment.
Whip checks should be installed in the fully extended position (no slack) for proper safety assurance.
Whip Check Cables are rated for 200 PSI air service. For higher pressure installations please see our nylon hose restraints, hose cable chokers, and hose whip stop systems. -
Hose to Tool Whipchecks air hose safety
Hose Safety Whip Checks are recommended in all pressurized hose applications over 1/2 inch, in order to keep operators and job sites safe. To prevent serious injury due to hose or coupling failure, install a Whip Check at each hose connection and from equipment / air source to the hose. Spring-loaded loops easily adjust to slip over the couplings and maintain a firm grip on the hose. Also known as whip arrestors or hose choker cables, these cables are a necessity for all pneumatic supply hose applications.
Whip checks should be installed in the fully extended position (no slack) for proper safety assurance.
Hose Safety Whip Checks, along with pneumatic check valves and safety clips, are integral products for a safe pneumatic hose system. Regular inspection and replacement of worn components is also imperative in maintaining a safe system and workplace. Always replace whip checks if a failure incident occurs, as this can cause damage to the cable and connections. -
Stainless Steel304and316 Whipcheck safety slings
Whipcheck – safety slings are a positive safe – guard for hose connections. These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device.
Whipchek – safety slings are a positive safe – guard for hose connections. These strong steel cables prevent hose
whip in case of accidental separation of coupling or clamp device. “Whipchek” reaches across the hose fittings to
provide stand-by safety for hose. Spring loaded loops in cable ends open easily to pass over the couplings for firm
grip on hose, as shown. They have been thoroughly tested with years of service.
There are various sizes of Whipcheks manufactured by LH. All materials used for in the manufacturing process conform to SABS & ISO standards, Materials being the cable, ferrules ect. -
whip check safety cable with copper bush
Whipcheck is a safety device used to prevent hoses from thrashing around if they break or separate under pressure. It consists of a length of strong steel cable with loops on each end that are secured around the hose and its fitting using clamps or wire rope clips. This helps to contain the hose in case of failure, preventing it from flailing around and potentially causing injury or damage. Whipchecks are commonly used in industries where high-pressure hoses are used, such as mining, construction, manufacturing, and oil and gas.